How to replace a toilet fill valve - Fluidmaster. Subscribe and visit our weekly podcast for more tips https://itunes.apple.com/us/podcast/fix-it-home-improvement/id880903087?mt=2
How to replace a toilet fill.
The Fluidmaster Fill Valve will fit most toilets. It adjusts from 9" to 14".
· First, shut off the valve below the toilet that feeds water to the tank.
· Next flush the toilet to drain the tank. You should hold down the handle to drain as much water as possible. You can also sponge out any water left or just put a small bucket or tray under the tank to catch any water remaining in the tank when they remove the old fill valve.
· Using an adjustable wrench loosen the nut connecting the supply line to the shut off valve to the toilet.
· Next loosen the nut using an adjustable pliers connecting the top of the supply line to the bottom of the old fill valve.
· Remove the old supply line.
· Next remove the nut connecting the old fill valve to the tank. This will be on the outside of the tank under the tank.
· After removing the nut, pull out the old fill valve.
· Taking the new fill valve, put the rubber washer on the bottom of the valve (beveled side down).
· Drop the new fill valve into the hole in the tank, facing the float toward the middle of the tank.
· From under the tank, connect the nut to hold the valve in place.
· Now connect the refill tube to the overflow pipe in the middle of the tank. This pipe keeps the tank from overflowing if the valve didn't turn off. It also puts water into the bowl after flushing.
· Use the fitting provided to attach the tube to the overflow pipe so it doesn't siphon out water.
· Connect the supply line from the shut off valve to the new fill valve.
If you are using a new supply line you will need to know the size. Most shut off valves are 3/8" compression. But some are 1/2" compression. The fill valve is 7/8". If you need help, bring in the old suppy line. We also have a Fit All supply line. It has interchangeable bushings for 1/2' IPS, 1/2" compression or 3/8" compression.
Once everything is connected. Turn on the water to the toilet and check for leaks.
You can adjust the height of the float with an adjustable rod using a screw driver or turning the knob by hand.
Tags: How to replace a toilet fill valve - Fluidmaster, replacing a toilet fill valve, replace fill valve, toilet fill valve, repair toilet, fix toilet, fill valve repair, fluidmaster, fill valves, home improvement, diy, diy projects, do it yourself